cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
410 Views
Message 1 of 6

My new address is not showing on BT

I am moving to a new build, the address has been registered but not showing on BT, does anyone know what I can do please?

0 Ratings
Reply
5 REPLIES 5
393 Views
Message 2 of 6

Re: My new address is not showing on BT

if a new build does it have fibre to the home pre installed



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings
Reply
383 Views
Message 3 of 6

Re: My new address is not showing on BT

The builder said fibre is available to the property from above whatever that means 

0 Ratings
Reply
352 Views
Message 4 of 6

Re: My new address is not showing on BT

if you have access to the new property then look for something like this if fibre provided by openreach.  there is a difference between there is fibre installed at the property and fibre is available at property - need it clarified

ont-pon.jpg



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings
Reply
274 Views
Message 5 of 6

Re: My new address is not showing on BT

Pray..

 

I have been in a new build for six years with fibre to the property.

 

I've had on going issues, as it turns out it was installed incorrectly.

They initially had the wrong address and despite numerous attempts on my part and updates, were still using my previous phone number!

 

Beware BT promises,  they have consistently let me down. 😡

0 Ratings
Reply
268 Views
Message 6 of 6

Re: My new address is not showing on BT

@Karen13 

Builders sometimes do a deal with providers other than Openreach. You need to ask the builder whether the fibre is Openreach or someone else.

Also check for the presence of an Openreach ONT as posted by @imjolly.