cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
2,515 Views
Message 1 of 14

0 Channels Available

Go to solution

Overnight I've lost every single channel!

TV Guide shows an error YVM305 which is no internet, but there is internet as IPlayer etc. are working fine.
Tried ethernet & wireless and 0 channels (free & subscribed)

I've spoken to BT this morning and everything has been rebooted, but no joy & I have an engineer coming out later in the week.

Does anyone have any suggestions of other things to try?

0 Ratings
Reply
13 REPLIES 13
2,495 Views
Message 2 of 14

Re: 0 Channels Available

Go to solution

@hkymre 

https://support.youview.com/youview-box/error-messages/yvm305/

YVM305 is ‘No TV Channels’, not no internet. Has your TV aerial fallen down?

I suppose it might apply to ‘No IP TV Channels’ if you have a Pro box and are running it with no TV aerial, and the IP channels aren’t coming through for some reason, but you haven’t said that.

Which is it?

—————————————————————————————————————
*** Longtime YouView box owner, BT Broadband customer, finally an EE TV subscriber ***
0 Ratings
Reply
2,487 Views
Message 3 of 14

Re: 0 Channels Available

Go to solution

Hi I had similar thing this morning. "This channel not available". I was on BBC1 I switched off the box with remote and back on. Channel then worked perfectly, I have Pro box in IPTV mode.  It's not the first time it's happened. 

2,471 Views
Message 4 of 14

Re: 0 Channels Available

Go to solution

Sorry, it’s ipTV

0 Ratings
Reply
2,455 Views
Message 5 of 14

Re: 0 Channels Available

Go to solution

@hkymre  Are you able to open  the EETV player  on the box normally ?

0 Ratings
Reply
2,430 Views
Message 6 of 14

Re: 0 Channels Available

Go to solution
I can’t see a eetv player on the box
IPlayer, c4 apps are working fine
Recordings can’t be watched as the channel is no longer available
0 Ratings
Reply
2,411 Views
Message 7 of 14

Re: 0 Channels Available

Go to solution

Just a guess, is your Pro box connected to your hub via mini-converters or other powerline adapters by any chance?

If so, power them both down, wait at least 1 minute and then power them both back up again

0 Ratings
Reply
2,392 Views
Message 8 of 14

Re: 0 Channels Available

Go to solution
No, it’s Cat5e into a netgear switch.
But it’s not working on just WiFi either
0 Ratings
Reply
2,348 Views
Message 9 of 14

Re: 0 Channels Available

Go to solution

Have you tried running a network diagnostic (connection test) from the settings menu on the pro box

0 Ratings
Reply
2,279 Views
Message 10 of 14

Re: 0 Channels Available

Go to solution

I have had a similar problem twice now caused when a software update does not complete. 

Try going to the software update in settings and forcing a check on new software. You'll probably get a message that the software is up to date. It is but it's incomplete.

I then had to do a soft reboot with no loss of recordings by the button press on the box method, NOT the on screen method.

 

0 Ratings
Reply