cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
1,310 Views
Message 1 of 11

BT8600 won't call out

I have  a BT 8600 Call Guardian phone, which has worked satisfactorily for years. Suddenly outgoing calls don't work. I get either a 'number unobtainable' tone, or a 'number not recognised' message, or silence. Incoming calls seem fine. I've tried the usual switching off and on again. Any better ideas, please/

0 Ratings
Reply
10 REPLIES 10
1,293 Views
Message 2 of 11

Re: BT8600 won't call out

Manually dialled, dialled from contacts or both?

If you have more than one handset, are they all affected?

0 Ratings
Reply
1,292 Views
Message 3 of 11

Re: BT8600 won't call out

Have you been moved to digital voice?

If so you need to plug the phone into the green socket on the back of the Smart Hub 2 or a Digital Voice Adapter

0 Ratings
Reply
1,276 Views
Message 4 of 11

Re: BT8600 won't call out

Yes, two handsets, both affected.
0 Ratings
Reply
1,274 Views
Message 5 of 11

Re: BT8600 won't call out

No - don't even know what that is!
0 Ratings
Reply
1,267 Views
Message 6 of 11

Re: BT8600 won't call out

How do you know you haven't been transferred to Digital Voice if you don't know what it is?

 

0 Ratings
Reply
1,263 Views
Message 7 of 11

Re: BT8600 won't call out

Does the home page of the hub manager show your number in the box labelled 'Phone' or 'Not Configured'?

 

0 Ratings
Reply
1,182 Views
Message 8 of 11

Re: BT8600 won't call out

OK, I've looked it up, and now I know that I have not been transferred to it.
0 Ratings
Reply
1,178 Views
Message 9 of 11

Re: BT8600 won't call out

It looks like the tech you're talking about is years ahead of what I have. There's no 'hub manager', no home page, just a small (3 cm square) screen on each handset, on which the number is not shown.
0 Ratings
Reply
1,170 Views
Message 10 of 11

Re: BT8600 won't call out

@kevingrafton 

Its quite possible that its an exchange fault, where its not decoding the tones properly. The exchange line cards are very old, and its not unusual for them to develop a fault, which is one of the reasons the old PSTN network is closing down.

If you ever re-contract or change your BT package, you will be moved onto BT Digital Voice, which does not use the equipment in the exchange.

You need to prove its not the phone first, before reporting it to BT, to save a possible charge.

If its an exchange fault, then its fairly easy for an Openreach Frames Technician to mode your line to a different equipment number.

 

0 Ratings
Reply