cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
12,060 Views
Message 1 of 7

No link to hub

Go to solution

Essential phones not working, message "no link to hub". Moved phone closer to hub still nothing. Solid blue light on hub . Help please.

0 Ratings
Reply
6 REPLIES 6
12,051 Views
Message 2 of 7

Re: No link to hub

Go to solution

try resetting the phone and pairing with hub again

you can go to hub manager 192.168.1.254 into address bar and once in hub manager  select phone number  and you can pair phone from there



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings
Reply
12,038 Views
Message 3 of 7

Re: No link to hub

Go to solution
Thanks tried it but didn't work. Selected phone number, then register device but no change to message on phone. Any other ideas? I've got to wait a week for an engineer to visit!!
0 Ratings
Reply
12,032 Views
Message 4 of 7

Re: No link to hub

Go to solution

As a workaround, you can plug an analogue phone or DECT base station into the green socket at the rear of the hub.

0 Ratings
Reply
12,026 Views
Message 5 of 7

Re: No link to hub

Go to solution

did you go to phone then menu then phone settings then reset before trying to pair with hub again.  I would also turn phone off after reset then back on again then try and pair with hub



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
12,013 Views
Message 6 of 7

Re: No link to hub

Go to solution
Absolutely brilliant!! It worked. Thank you so much. So much for the brilliant BT customer service people.
0 Ratings
Reply
11,247 Views
Message 7 of 7

Re: No link to hub

Go to solution

Did exactly as you said, reset to factory settings and worked perfectly