cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
107 Views
Message 1 of 4

Replacing lead: BT socket to BT Decor phone

Go to solution

I need to replace a defective lead between a BT socket and a fairly old BT Decor phone. There's a bewildering variety of leads online! Which type should I choose please?

0 Ratings
Reply
3 REPLIES 3
101 Views
Message 2 of 4

Re: Replacing lead: BT socket to BT Decor phone

Go to solution

You only need two wires but it doesn't matter if there are more.

The BT end is always the same, it's the wiring in the clear RJ11 socket that goes into the phone that changes. So take a look at the cable & see where the wires go. You'll maybe need a magnifying glass or take a pic on your phone & zoom in. If they're connected to the centre two pins, that's cross-wired. If not it's straight.

 

0 Ratings
Reply
92 Views
Message 3 of 4

Re: Replacing lead: BT socket to BT Decor phone

Go to solution

@robatredcar 

Since you are only requesting a replacement lead, here's an earlier post  on the same topic.

BT Community : BT Decor - cable  

0 Ratings
Reply
56 Views
Message 4 of 4

Re: Replacing lead: BT socket to BT Decor phone

Go to solution
Thanks very much!
0 Ratings
Reply