Hi
I moved my Hub 2 down one shelf on my cabinet. When I have plugged it all back in, it's just flashing orange lights.
Any ideas?
Flashing orange light usually means it's connecting to broadband, on FTTC/xDSL (via the phone line) that can take a couple of minutes. If you are on FTTP/Full Fibre, make sure that the connection to the box on the wall is using WAN (port 4).
When connected to port 4 it is flashing purple
is the router connected to phone outlet or box like this
if like one above then middle connection (yellow ethernet) should be connected to port 4 on back of hub
It's connected to a phone port only
sorry but are you sure you put cables back in the same place before you moved router
If it’s connected to the phone socket on the wall, then the other end needs to connect to the grey DSL port on the hub.