cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
1,580 Views
Message 1 of 7

Wall socket & adaptor? replacement

Go to solution

Who would I need to contact to get a wall socket and adaptor replaced as the wires are in a pretty poor state and just about hanging on. 

Any advice would be appreciated 

0 Ratings
Reply
6 REPLIES 6
1,576 Views
Message 2 of 7

Re: Wall socket & adaptor? replacement

Go to solution

Assuming you are with BT it's 0800 800 150. 

What adaptor do you mean?

Post a photo as it may not be BT property. 

(If I have helped you in any way please click the thumbs up. Thank You)
If I have solved your Issue please click the "Mark as accepted solution" button.
0 Ratings
Reply
1,564 Views
Message 3 of 7

Re: Wall socket & adaptor? replacement

Go to solution

Screenshot_20230516_093238_Gallery.jpg

FInally managed to upload a picture. 

The wiring is just about hanging on in the top left of the 2 

 

0 Ratings
Reply
1,547 Views
Message 4 of 7

Re: Wall socket & adaptor? replacement

Go to solution

looks like up to you to get it fixed.  if you don't know someone who can fix it then look up local paper for telecom engineer who will be able to fix it   Looks like just a normal phone extension cable

the filter will be ok



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
1,500 Views
Message 5 of 7

Re: Wall socket & adaptor? replacement

Go to solution

As Imjolly has stated, that is not a bit of BT equipment. You would have to arrange your own repair or purchase a new extension cable. 

(If I have helped you in any way please click the thumbs up. Thank You)
If I have solved your Issue please click the "Mark as accepted solution" button.
0 Ratings
Reply
1,469 Views
Message 6 of 7

Re: Wall socket & adaptor? replacement

Go to solution

@Sausagefingers23  There's no phoneline shown connected to that filter. If that's the case, then you shouldn't need the filter.

The extension lead is very basic, sold by most hardware shops in varying lengths.

exten.jpg

0 Ratings
Reply
1,454 Views
Message 7 of 7

Re: Wall socket & adaptor? replacement

Go to solution

@Carlusha

You need the filter only purely as a pstn to RJ11 adaptor as you cannot plug the router into that type of extension lead. 

(If I have helped you in any way please click the thumbs up. Thank You)
If I have solved your Issue please click the "Mark as accepted solution" button.