cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
1,645 Views
Message 21 of 32

Re: HH6 used as WAP doesnt allow internet connection

Make sure Smart Setup is disabled on both hub and WAP. Do you have Private address - MAC randomisation enabled on your Apple device, if so disable it.

0 Ratings
1,641 Views
Message 22 of 32

Re: HH6 used as WAP doesnt allow internet connection

Smart setup is off on both as is private address on apple device.

I set the dns server manually on the apple device. This now shows a a "wifi indicator" that was previously missing. However, it still doesnt give me internet and I still cant ping the router from my apple device (though I can ping other devices connected to the router).

Question appears to be why would router not send information back to apple device?

0 Ratings
1,633 Views
Message 23 of 32

Re: HH6 used as WAP doesnt allow internet connection

Could you post a screenshot of both the hub and WAP Advanced Settings>My Network>IPv4 configuration please.

0 Ratings
1,627 Views
Message 24 of 32

Re: HH6 used as WAP doesnt allow internet connection

Please see attached

 

Router page 

Aok_2-1627300497432.png

 

WAP page

Aok_3-1627300535034.png

 

 

0 Ratings
1,621 Views
Message 25 of 32

Re: HH6 used as WAP doesnt allow internet connection

A couple of things to try.

First shouldn't make any difference, but set the DHCP lease time to 21 days on the hub.

Secondly, try disabling authoritative DHCP on the hub.

The WAP seems to have a custom DHCP range and lease time set despite DHCP being set to off which seems odd.

0 Ratings
1,616 Views
Message 26 of 32

Re: HH6 used as WAP doesnt allow internet connection

Lease time set to 21 days on router.

Authoritative DHCP set to off on router.

WAP DHCP custom setting - something I changed in the past but as DHCP is off I understood these had no effect. 

Unfortunately - no difference.

0 Ratings
1,614 Views
Message 27 of 32

Re: HH6 used as WAP doesnt allow internet connection


@Aok wrote:

WAP DHCP custom setting - something I changed in the past but as DHCP is off I understood these had no effect. 

That's why I queried it, with DHCP off there should be nothing showing.

If you have factory reset the WAP, it shouldn't retain the custom setting either.

Are you sure you fully factory reset the WAP and set it up again?

0 Ratings
1,600 Views
Message 28 of 32

Re: HH6 used as WAP doesnt allow internet connection

Apologies. 

I have now factory reset WAP (and router for good measure). Screenshot of router and then WAP management page. As you said the custom settings doesnt have anything on WAP page. However, when I save the settings and go back in, the custom settings return though they are with the default setting parameters.

Unfortunately - still no luck.

Aok_0-1627308500959.png

Aok_1-1627308654359.png

WAP page after I saved and then reentered page - the custom settings reappear! though they are the same as default.

Aok_2-1627308721766.png

 

0 Ratings
1,598 Views
Message 29 of 32

Re: HH6 used as WAP doesnt allow internet connection

Hmm, that shouldn't happen. I wonder if the HH6 you are using as a WAP is faulty.

Not sure if you want the hassle, but it could be worth swapping the 2 hubs over and see if that works.

 

0 Ratings
1,592 Views
Message 30 of 32

Re: HH6 used as WAP doesnt allow internet connection

Happy to try it. Will leave it till tonight when family dont want wifi.

0 Ratings