cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
2,710 Views
Message 1 of 21

Openreach wont drop SNR

Go to solution

Hi All

 

I am having a mare and wondering if someone can help my downstream snr is stuck at 8db i want it lowered had 2 engineer visits neither wanted to do it because im getting 67meg

 

Ive lived in the flat upstairs 3db for 2 years no issues.

 

Please help

 

Product name:

BT Hub 6A

Serial number:

+084316+NQ74439782

Firmware version:

SG4B1000E020

Firmware updated:

12-Jan-2021

Board version:

1.0

Gui version:

1.115.0

DSL uptime:

0 Days, 6 Hours 16 Minutes 59 Seconds

Data rate:

20.00 Mbps / 80.00 Mbps

Maximum data rate:

26025 / 90949

Noise margin:

9.6 dB / 8 dB

Line attenuation:

20.9 dB

Signal attenuation:

13.6 dB / 20.9 dB

VPI / VCI:

0/38

Modulation:

G_993_2_ANNEX_B

Latency type:

Fast Path

Data sent / received:

695 MB Uploaded / 2 GB Downloaded

Broadband username:

bthomehub@btbroadband.com

BT Wi-fi:

Active

2.4 GHz wireless network name:

BTHub6-7R9C

2.4 GHz wireless channel:

Smart (Channel 6)

5 GHz wireless network name:

BTHub6-7R9C

5 GHz wireless channel:

Smart (Channel 36)

Wireless security:

WPA2 (Recommended)

Wireless mode:

Mode 1

Firewall:

On

MAC address:

A0:39:EE:67:3F:95

Software variant:

-

Boot loader:

9.2.0

0 Ratings
20 REPLIES 20
2,705 Views
Message 2 of 21

Re: Openreach wont drop SNR

Go to solution

Your SNR is high because you are receiving the maximum speed possible 80M.

0 Ratings
2,702 Views
Message 3 of 21

Re: Openreach wont drop SNR

Go to solution

Yeah but i had the same in the upstairs flat and managed to get it lowered. 

0 Ratings
2,696 Views
Message 4 of 21

Re: Openreach wont drop SNR

Go to solution

You are at the maximum speed for fibre 2. SNR figure is totally irrelevant.

0 Ratings
2,684 Views
Message 5 of 21

Re: Openreach wont drop SNR

Go to solution

Im not because my throughput is 71 meg. I did say! 

0 Ratings
2,670 Views
Message 6 of 21

Re: Openreach wont drop SNR

Go to solution

Your sync speed is 80M, the maximum for fibre2, and governs the SNR figure. Throughput will always be lower than sync speed and has nothing to do with SNR.

2,663 Views
Message 7 of 21

Re: Openreach wont drop SNR

Go to solution

Then how come when I got it lowered to 3db I hit 75 meg? I know what I’m after I’m sick of going around in circles! 

0 Ratings
2,655 Views
Message 8 of 21

Re: Openreach wont drop SNR

Go to solution

I can assure you SNR is only related to sync speed and not throughput and as you are syncing at maximum speed it is totally irrelevant. It is impossible to lower it.

 

0 Ratings
2,653 Views
Message 9 of 21

Re: Openreach wont drop SNR

Go to solution

As @licquorice has said your noise margin is high at 8db and is correct as you have max connection speed of 80mb but a far higher attainable speed. You will not get a lower noise margin unless your difference in speed between actual and attainable reduces.



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings
2,634 Views
Message 10 of 21

Re: Openreach wont drop SNR

Go to solution

Sorry but that’s bs because  74 meg on 4db what I got in the flat upstairs last summer... same bloody junction box. 

this is what frustrates me... lower the SNR. Job done.. what’s so hard about it!! 

 

0 Ratings