cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
2,666 Views
Message 11 of 19

Re: Replacing BT Home Hub with Google Nest WiFi Issues (FTTP)

Go to solution

No idea, but it won't hurt to do so.

0 Ratings
2,665 Views
Message 12 of 19

Re: Replacing BT Home Hub with Google Nest WiFi Issues (FTTP)

Go to solution

will i loose all my connections if i do the rest ?

0 Ratings
2,645 Views
Message 13 of 19

Re: Replacing BT Home Hub with Google Nest WiFi Issues (FTTP)

Go to solution

I've tried all of these but still no broadband, I've just got BT broadband today do I have to connect their router to the network first to activate anything ?

0 Ratings
2,643 Views
Message 14 of 19

Re: Replacing BT Home Hub with Google Nest WiFi Issues (FTTP)

Go to solution

You might need to use vlan id 101

0 Ratings
2,641 Views
Message 15 of 19

Re: Replacing BT Home Hub with Google Nest WiFi Issues (FTTP)

Go to solution

Where do I put the vlan etc

0 Ratings
2,638 Views
Message 16 of 19

Re: Replacing BT Home Hub with Google Nest WiFi Issues (FTTP)

Go to solution

Apologies with PPPoE on OR FTTP vlan id is not needed.

It just needs the username and anything for a password or blank. 

0 Ratings
2,628 Views
Message 17 of 19

Re: Replacing BT Home Hub with Google Nest WiFi Issues (FTTP)

Go to solution

I have fttp 500mb activated today all the lights are on the ont etc but on set up still says no Internet?

0 Ratings
2,608 Views
Message 18 of 19

Re: Replacing BT Home Hub with Google Nest WiFi Issues (FTTP)

Go to solution

thanks for all the help guys, i actually got the BT router delivered this morning after getting no where last night, i plugged it in and NO BROANDBAND hub on orange so now have to wait for an engineer on tuesday, thankfully Virgin doesnt get diconnected until friday.  So now going around the house connecting everything again!

0 Ratings
2,573 Views
Message 19 of 19

Re: Replacing BT Home Hub with Google Nest WiFi Issues (FTTP)

Go to solution

thanks, the login and "bt" as the password worked, it was the back end where the issues were.....

0 Ratings