cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
2,111 Views
Message 1 of 10

Speed drop again

hi guys.

Can you have look at this stats and be tell me what u think. Had a engineer out few months ago said was loop fault and he didn't recommend power line adapters, I've not used them since then and switched to sh2.  But connection keeps getting banded.   Line only lasts few months before starts to drop speed. This now gone from 46-47,  43999, 39999 now 35

Product code:Smart Hub 2
 

 

Serial number:+091298+2012005641
 

 

Firmware version:v0.21.03.07094-BT
 

 

Firmware updated:Tue Oct 13 12:52:38 2020
 

 

Board version:R01
 

 

GUI version:1.56 15_02_2019
 

 

DSL uptime:9 days,00 Hours59 Mins16 Secs
 

 

Data rate:7.665 Mbps / 35 Mbps
 

 

Maximum data rate:7.661 Mbps / 45.552 Mbps
 

 

Noise margin:6.1 / 10.1
 

 

Line attenuation:10.7 / 21.3
 

 

Signal attenuation:10.7 / 21.5
 

 

Thanks guys

 

 

0 Ratings
9 REPLIES 9
2,099 Views
Message 2 of 10

Re: Speed drop again

Any noise on your line? 17070 option 2.

0 Ratings
2,082 Views
Message 3 of 10

Re: Speed drop again

Certainly looks like a line connection problem with connection dropping from one banded profile to another as problem gets worse



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings
2,023 Views
Message 4 of 10

Re: Speed drop again

  • Cheers guys.

Should that noise margin be that high.  Here it is from today

Data rate:7.665 Mbps / 35 Mbps
 

 

Maximum data rate:7.661 Mbps / 45.941 Mbps
 

 

Noise margin:5.9 / 10.3
 

 

Line attenuation:10.7 / 21.3
 

 

Signal attenuation:10.7 / 21.5

 

0 Ratings
2,017 Views
Message 5 of 10

Re: Speed drop again

Normally noise margin about 6db or lower if G.INP active

your noise margin is high as your connection is seen as unstable and DLM has increased your noise margin and reduced your speed and in fact put you in banded profiles. You have been dropping in banded profiles suggesting a line problem which needs engineer visit



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings
2,000 Views
Message 6 of 10

Re: Speed drop again

I've had bt engineer out before about it last time was 6th june he said was loop fault and changed faceplate. Again before that bt engineer said was hr fault. 

End June 2020 was 43999 and I had engineer out beginning June that said was loop fault,faceplate change and couldn't do lift n shift and dlm reset.

June 43999

August 43998

September 39999

November 35

What my next course of action another BT complaint.

Thanks guys

 

0 Ratings
1,982 Views
Message 7 of 10

Re: Speed drop again

ther is no point in a DLM reset as you have an unstable conenction as can be seen with your reducing connection speed dropping from one banded profile to another.  You need to get a stable connection first and that means another engineer visit



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings
1,938 Views
Message 8 of 10

Re: Speed drop again

Should a smart hub 2 do a recycle at 5pm in afternoon ain't it usually 2am.
 
Product code:Smart Hub 2
 

 

Serial number:+091298+2012005641
 

 

Firmware version:v0.21.03.07094-BT
 

 

Firmware updated:Tue Oct 13 12:52:38 2020
 

 

Board version:R01
 

 

GUI version:1.56 15_02_2019
 

 

DSL uptime:0 days,05 Hours04 Mins45 Secs
 

 

Data rate:7.706 Mbps / 35 Mbps
 

 

Maximum data rate:7.706 Mbps / 45.921 Mbps
 

 

Noise margin:6.1 / 10.4
 

 

Line attenuation:10.7 / 21.4
 

 

 
0 Ratings
1,934 Views
Message 9 of 10

Re: Speed drop again

Any noise on your line? 17070 option 2.

0 Ratings
1,927 Views
Message 10 of 10

Re: Speed drop again

There is no set time for a hub reset especially if there is a problem with line noise



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings