cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
2,015 Views
Message 1 of 10

Speeds pegged at 30Mbps

Hi,

 

I've had trouble with my speed ever since I signed up 12 months ago. I never seem to be able to get a steady 46Mbps which is my stay fast guarantee. It usually drops to 25Mbps for a few weeks, i contact LC, they send multiple engineers, it magically returns to 50Mbps for a few weeks then the cycle starts over again. I have been locked at 30Mbps for about a moth now, upload speed has dropped significantly as well. LC are not available so i'm asking for some help on here.

 

I have uploaded a screen of my stats.

 

Thanks.

 

JordanBAC.JPG

0 Ratings
9 REPLIES 9
2,012 Views
Message 2 of 10

Re: Speeds pegged at 30Mbps

Can you post the router stats as well?

0 Ratings
2,009 Views
Message 3 of 10

Re: Speeds pegged at 30Mbps

Besides posting the connection stats could you also do a quiet line test, 17070 option 2, best with corded phone.

0 Ratings
2,005 Views
Message 4 of 10

Re: Speeds pegged at 30Mbps

Router stats are

 

 Connection status:
 
 
 Connection type:

Fibre Broadband (VDSL)

 Downstream sync speed:

32.40 Mbps

 Upstream sync speed:

3.69 Mbps

 Network uptime:

0 Days, 0 Hours 3 Minutes

 Broadband IP address:

81.153.136.174

 Default gateway:

172.16.14.121

 Primary DNS:

81.139.57.100

 Secondary DNS:

81.139.56.100

 System uptime:

1 Days, 0 Hours 48 Minutes

 Serial number:

+084319+NQ90758601

 Firmware version:

SG4B1000E020

 Firmware updated:

31-Mar-2020

 BT Wi-fi status:

Active

0 Ratings
2,004 Views
Message 5 of 10

Re: Speeds pegged at 30Mbps

I only have a cordless phone but doesn't seem noisy.
0 Ratings
1,982 Views
Message 6 of 10

Re: Speeds pegged at 30Mbps

is the quiet line test silent no noise at all?

stats from advanced settings then technical log information please 



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings
1,968 Views
Message 7 of 10

Re: Speeds pegged at 30Mbps

No noise at all.

 

Product name:

BT Hub 6A

Serial number:

+084319+NQ90758601

Firmware version:

SG4B1000E020

Firmware updated:

31-Mar-2020

Board version:

1.0

Gui version:

1.115.0

DSL uptime:

0 Days, 0 Hours 55 Minutes 43 Seconds

Data rate:

3.69 Mbps / 32.40 Mbps

Maximum data rate:

25593 / 74541

Noise margin:

23.2 dB / 15.2 dB

Line attenuation:

22.1 dB

Signal attenuation:

14.8 dB / 22.1 dB

VPI / VCI:

0/38

Modulation:

G_993_2_ANNEX_B

Latency type:

Fast Path

Data sent / received:

18 MB Uploaded / 123 MB Downloaded

Broadband username:

bthomehub@btbroadband.com

BT Wi-fi:

Active

2.4 GHz wireless network name:

BTHub6-PH5P

2.4 GHz wireless channel:

Smart (Channel 11)

5 GHz wireless network name:

BTHub6-PH5P

5 GHz wireless channel:

Smart (Channel 36)

Wireless security:

WPA2 (Recommended)

Wireless mode:

Mode 1

Firewall:

On

MAC address:

00:CB:51:A7:56:CF

Software variant:

-

Boot loader:

9.2.0

0 Ratings
1,933 Views
Message 8 of 10

Re: Speeds pegged at 30Mbps

After a bit more reading I'm assuming I'm on a banded profile due to the instability I've had in the last 12 months, can someone help me get out?

0 Ratings
Anonymous
Not applicable
1,900 Views
Message 9 of 10

Re: Speeds pegged at 30Mbps


@jjshacks13wrote:

Router stats are

 Network uptime:

0 Days, 0 Hours 3 Minutes

 

Network Uptime 3 mins? do you not leave your router powered up 24/7 as advised?

https://community.bt.com/t5/Archive-Staging/Should-I-leave-router-on-24-7/td-p/1278317

0 Ratings
1,892 Views
Message 10 of 10

Re: Speeds pegged at 30Mbps

Yes it's on 24/7 I was doing checks with it being plugged into the master socket. 

0 Ratings