cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
2,522 Views
Message 1 of 15

epson stylus printer not seeing the ssid of my hub 6 but sees my old hub 5. any ideas?

0 Ratings
14 REPLIES 14
2,516 Views
Message 2 of 15

Re: hub 6

Go to solution

have you turned of smart setup  

 

Turn Off smart setup

 

have you split the networks   

 

Split the networks

 

 

 

 

 

 

 

 



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings
2,507 Views
Message 3 of 15

Re: hub 6

Go to solution

yes i have split the networks and turned smart hub off

0 Ratings
2,504 Views
Message 4 of 15

Re: hub 6

Go to solution

then I would reset the printer and start connecting again



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings
2,500 Views
Message 5 of 15

Re: hub 6

Go to solution

when i try to set up wireless printing i cannot see the hub 6 in the ssid list. i have plugged in my old hub 5 and it appeared straight away

0 Ratings
2,494 Views
Message 6 of 15

Re: hub 6

Go to solution

i cannot see any difference in the wireless setup between the hub 5 and 6

0 Ratings
2,491 Views
Message 7 of 15

Re: hub 6

Go to solution

printer reset, can only see the hub 5 and my neighbours router

0 Ratings
2,490 Views
Message 8 of 15

Re: hub 6

Go to solution

wireless works on my phone and tablet

0 Ratings
2,480 Views
Message 9 of 15

Re: hub 6

Go to solution

@brett1 wrote:

wireless works on my phone and tablet


Its possible that the wireless encryption on the HH6 is not supported by your printer. I am not sure whether there  is an option to change that on the HH6, otherwise you will just have to keep using the HH5.

It mat be worth doing a factory reset on the home hub 6, to see i8f it helps.

Are you sure that the 2.4GHz is being transmitted, as your other devices may be connecting on 5GHz?

Make sure the HH5 is turned off when you do any tests.

0 Ratings
2,479 Views
Message 10 of 15

Re: hub 6

Go to solution

did you actually reset printer back to factory settings as that should delete any record of hh5 provided it is not connected



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings