cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
411 Views
Message 1 of 5

SH2 firmware update has stopped

Go to solution

I have a SH2 at another house which is also supplied by BT but the hub just won't update.  It's stuck on a firmware from end of 2020 (v0.24.xxxxx) however firmware with SH2 at this house is fine and running on latest (v0.37.xxxx).

Is it possible to PM with the serial number for the lazy updating SH2 and push it through?

Thanks. 

0 Ratings
Reply
4 REPLIES 4
378 Views
Message 2 of 5

Re: SH2 firmware update has stopped

Go to solution

Is the hub powered and connected 24/7 or is it only intermittently connected?

Try swapping the hubs and see if it updates at the good address.

0 Ratings
Reply
365 Views
Message 3 of 5

Re: SH2 firmware update has stopped

Go to solution

Thanks for your reply.

Both hubs are powered on 24/7.  

The idea of using the good address had crossed my mind but unfortunately the practical reality of this means it just isn’t possible.

I was hoping that an alternative route via BT community forum moderator could do the trick.  Happy to supply the BT account number at the other address so checks can prove who supplies the phone/internet.

0 Ratings
Reply
352 Views
Message 4 of 5

Re: SH2 firmware update has stopped

Go to solution

Have you tried doing a factory reset


Please help the community to help you by including all relevant information, single word responses may be quick to type but they offer little value to this Community Forum and do not help its team of volunteer members to help you.
195 Views
Message 5 of 5

Re: SH2 firmware update has stopped

Go to solution
Did exactly that and 2mins later new firmware download was complete and then it restarted itself with the update completed.