Archer VR2100 on FTTP

[licquorice]

In the connection settings where you chose PPPoE, make sure vlan tag is NOT ticked as enabled.

[CobaltTJ]

It's greyed out and says "VLAN ID cannot be disabled when Ethernet Connection is enabled"

[CobaltTJ]

I'll get back to this tomorrow and have another go, thank you much for your suggestions

[licquorice]

Hmm, odd. It ought to say VLAN ID cannot be enabled rather than disabled when Ethernet connection is enabled.

The VLAN tag 101 is a function of the modem (ONT in your case)

[NorthernNico]

I assume you rebooted the device after changing the operation mode from DSL modem mode to wireless router mode?

[CobaltTJ]

Yes of course, I've made sure to reboot after every config change.

[Les-Gibson · Accepted solution]

Does this help

How to configure the AC VDSL/ADSL Modem Router as a regular wireless router (new logo) | TP-Link Uni...

[CobaltTJ]

I'll give it a go shortly, and many thanks and kudos all round!

[CobaltTJ]

I finally got it working today. I have no idea why I was receiving the VLAN tag error but rebooting and resetting everything got rid of it. I did the setup over ethernet one more time and it worked. Thank you everyone, got there in the end!

[licquorice]

Glad you got it sorted.