cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
1,287 Views
Message 1 of 6

Cable install on surface!!!

I had full fibre installed installed in July. The install went across mine and my neighbours front garden where open reach dug a slit trench and buried cable directly. However on a section with paving slabs they have tucked the cable between 2 slabs and left it visible on the surface- over time dirt is working its way under the slabs and the cable now sits proud of them. This does not seem right to me- Im afraid the cable will get mown or someone will trip over it. How do I go about getting this rectified? 

0 Ratings
Reply
5 REPLIES 5
1,271 Views
Message 2 of 6

Re: Cable install on surface!!!

Just to clarify, are BT your provider  ?

1,221 Views
Message 3 of 6

Re: Cable install on surface!!!

Yes BT are my provider

0 Ratings
Reply
1,216 Views
Message 4 of 6

Re: Cable install on surface!!!

0 Ratings
Reply
1,149 Views
Message 5 of 6

Re: Cable install on surface!!!

RFOD Cable can be installed Direct in Ground but all the Civils Teams I know, know it’s a bad idea and still use Gabacom Sub Duct.

Unfortunately Openreach are becoming very Stat Heavy on their Civils Teams, just like they’ve always been with the SD Teams.

This of course puts pressure on their guys to cut corners.

0 Ratings
Reply
1,076 Views
Message 6 of 6

Re: Cable install on surface!!!

Call the FTTP Team on 0800 587 4787 and report the problem to them.

0 Ratings
Reply