The plug for my Openreach junction box (the one before the router) is so big that it is causing an issue with furniture.
The plug says it is:
- 100-240V
- 50/60Hz
- 6.0W
- 12.0V
- 0.5A
Has anyone replaced this plug with a flatter one? Is there an option on sale?
that is not just an ordinary plug but specific to your ONT. You could connect a 2 way trailing extension and connect the ONT plug to the extension
That's not going to be suited to the challenge I have, sadly. It's a shame that the plug is so big. It's causing a big issue.
Just for future reference, the box is called an ONT (Optical Network Terminal). The plug is actually a low voltage PSU (Power Supply Unit), rather than a simple plug. I have the same type and I've just measured it. It stands 1" higher than a normal plug, so I'm not sure how that is a challenge.
If you can be a bit clearer about what this "challenge" is we may be able to offer a better solution.
Get a competent person/electrician to extend the cable so that you can plug it into another electrical socket or get Openreach out to move the ONT to a different location where size of the plug won't be an issue. It will cost you about £150 or more to do that.
With at least most of our ONTs using a common socket size (unlike the SmartHub 2) you could change to a 12V power adapter that runs from a regular UK 3 pin plug to a figure 8 or clover-leaf socket. With just 2A being required, you'll be better off getting a 'quality' switching supply, but they are easily available on-line. Cannot stress enough that the power supply needs to be designed for either IT or medical use, so don't just get the cheapest one going! *I would not consider this type of adapter to be pet friendly - due to chewing!
You can also get compatible power supplies that are just flatter - probably about twice the height of a standard UK plug!
Probably easier to just rearrange your furniture