Forum Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Crimliar
Recognised Expert

‎07-08-2023 21h58 - edited ‎07-08-2023 22h00

1,583 Views
Message 31 of 55

Re: IPv6 on TP-Link Archer AX95 with BT Full Fibre

Go to solution

Pretty sure it needs to share the PPPoE

MyNet@gtax6000:/tmp/home/root# ifconfig ppp0
ppp0 Link encap:Point-to-Point Protocol
inet addr:xx.xx.xx.xx P-t-P:172.16.18.229 Mask:255.255.255.255
inet6 addr: fe80::949f:2804:f0f:556e/10 Scope:Link
UP POINTOPOINT RUNNING MULTICAST MTU:1492 Metric:1
RX packets:7044746 errors:0 dropped:0 overruns:0 frame:0
TX packets:1751536 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:8791764833 (8.1 GiB) TX bytes:350716797 (334.4 MiB)

The only address in there I need to hide is my own IPv4 address, the gateway is common and the IPv6 local gateway is only reachable from inside my LAN (so mods no need to edit!)


I only learn by making mistakes and owning up to them - boy do I learn a lot!
0 Ratings
Reply
licquorice
Distinguished Sage
Distinguished Sage

on ‎07-08-2023 22h02

1,575 Views
Message 32 of 55

Re: IPv6 on TP-Link Archer AX95 with BT Full Fibre

Go to solution

Yeah, didn't know whether specifying the same credentials separately might work.

Surprised there isn't a setting to define the prefix length anywhere.

0 Ratings
Reply
NJackooo
Aspiring Contributor

on ‎07-08-2023 22h02

1,574 Views
Message 33 of 55

Re: IPv6 on TP-Link Archer AX95 with BT Full Fibre

Go to solution

Yeah i see the fe80 address on stateless, so I guess that's fine, I'm gonna try rebooting now with the suggestions the other user suggested (Thanks by the way).

0 Ratings
Reply
NJackooo
Aspiring Contributor

on ‎07-08-2023 22h11

1,562 Views
Message 34 of 55

Re: IPv6 on TP-Link Archer AX95 with BT Full Fibre

Go to solution

So my log is full of this upon hitting the connect button (not restarted yet as people are streaming at the moment).

2023-08-07 22:09:33 PPP INFO [6386] pppoe send PADI Host-Uniq(18f2)

2023-08-07 22:09:33 PPP INFO [6386] pppoe send PADT due to(resending PADI)

2023-08-07 22:09:28 PPP INFO [6386] pppoe send PADI Host-Uniq(18f2)

2023-08-07 22:09:28 PPP INFO [6386] pppoe send PADT due to(resending PADI)

2023-08-07 22:09:17 PPP INFO [5614] pppoe send PADI Host-Uniq(15ee)

2023-08-07 22:09:17 PPP INFO [5614] pppoe send PADT due to(resending PADI)

2023-08-07 22:09:07 PPP INFO [5614] pppoe send PADI Host-Uniq(15ee)

2023-08-07 22:09:07 PPP INFO [5614] pppoe send PADT due to(resending PADI)

2023-08-07 22:09:02 PPP INFO [5614] pppoe send PADI Host-Uniq(15ee)

2023-08-07 22:09:02 PPP INFO [5614] pppoe send PADT due to(resending PADI)

2023-08-07 22:08:51 PPP INFO [4618] pppoe send PADI Host-Uniq(120a)

2023-08-07 22:08:51 PPP INFO [4618] pppoe send PADT due to(resending PADI)

2023-08-07 22:08:41 PPP INFO [4618] pppoe send PADI Host-Uniq(120a)

2023-08-07 22:08:41 PPP INFO [4618] pppoe send PADT due to(resending PADI)

2023-08-07 22:08:39 Network INFO [4289] Connect interface internetv6

2023-08-07 22:08:39 Network INFO [4289] Connect interface wanv6

2023-08-07 22:08:36 PPP INFO [4618] pppoe send PADI Host-Uniq(120a)

2023-08-07 22:08:36 PPP INFO [4618] pppoe send PADT due to(resending PADI)

2023-08-07 22:08:34 Traffic Statistics INFO [11293] stats reset

2023-08-07 22:08:34 Network INFO [4289] Reload config

0 Ratings
Reply
licquorice
Distinguished Sage
Distinguished Sage

on ‎07-08-2023 22h16

1,554 Views
Message 35 of 55

Re: IPv6 on TP-Link Archer AX95 with BT Full Fibre

Go to solution

Do those PPP entries stop if you go back to share with IPv4?

Its trying to create a PPPoE session and failing, perhaps because you have an IPv4 session already.

0 Ratings
Reply
NJackooo
Aspiring Contributor

‎07-08-2023 22h43 - edited ‎07-08-2023 22h44

1,545 Views
Message 36 of 55

Re: IPv6 on TP-Link Archer AX95 with BT Full Fibre

Go to solution

They do stop, and it shows me a fe80 address for IPv6 under WAN after a reboot.

 

devices don’t get a 2020 address or any ipv6 address for that matter now and it’s constantly looping my NAT/ portforwarding and esssntially breaking it.

I’ve disabled IPv6 for now, I suspect it’s TP-Link not supporting the 56 prefix as others have reported 🙄

2023-08-07 22:39:15 NAT NOTICE [29356] Virtual server created succeeded[ex-port:27367 ip:192.168.1.171 in-port:32400 protocol:tcp]

2023-08-07 22:39:13 Remote Management INFO [30163] Service stop

2023-08-07 22:39:12 NAT INFO [29356] Initialization succeeded

2023-08-07 22:39:11 NAT INFO [29356] Initialization succeeded

2023-08-07 22:39:10 NAT NOTICE [28403] Virtual server created succeeded[ex-port:27367 ip:192.168.1.171 in-port:32400 protocol:tcp]

2023-08-07 22:39:07 NAT INFO [28403] Initialization succeeded

2023-08-07 22:39:06 NAT INFO [28403] Initialization succeeded

2023-08-07 22:39:06 Remote Management INFO [28560] Service stop

2023-08-07 22:39:01 NAT NOTICE [25695] Virtual server created succeeded[ex-port:27367 ip:192.168.1.171 in-port:32400 protocol:tcp]

2023-08-07 22:38:58 UPnP INFO [26782] Service stop

2023-08-07 22:38:58 NAT INFO [25695] Initialization succeeded

2023-08-07 22:38:57 NAT INFO [25695] Initialization succeeded

2023-08-07 22:38:57 Remote Management INFO [26360] Service stop

2023-08-07 22:38:54 NAT NOTICE [24591] Virtual server created succeeded[ex-port:27367 ip:192.168.1.171 in-port:32400 protocol:tcp]

2023-08-07 22:38:51 NAT INFO [24591] Initialization succeeded

2023-08-07 22:38:50 NAT INFO [24591] Initialization succeeded

2023-08-07 22:38:50 Remote Management INFO [24951] Service stop

2023-08-07 22:38:49 PPP INFO [24657] ppp receive IPCP ACK

2023-08-07 22:38:49 PPP INFO [24657] ppp send IPCP Req options(addr=86.-snip-;)

2023-08-07 22:38:49 PPP INFO [24657] ppp receive IPCP NAK options(addr=86.-snip-;)

2023-08-07 22:38:49 PPP INFO [24657] ppp send IPCP Req options(addr=0.0.0.0;)

2023-08-07 22:38:49 PPP INFO [24657] ppp receive CHAP Success: CHAP authentication success

2023-08-07 22:38:49 PPP INFO [24657] ppp send CHAP Response name=bthomehub@btinternet.com

2023-08-07 22:38:49 PPP INFO [24657] ppp receive CHAP Challenge name=acc-aln2.stp

2023-08-07 22:38:49 PPP INFO [24657] ppp receive LCP ACK

2023-08-07 22:38:49 PPP INFO [24657] ppp send LCP ACK

2023-08-07 22:38:49 PPP INFO [24657] ppp receive LCP R

0 Ratings
Reply
NJackooo
Aspiring Contributor

on ‎07-08-2023 23h08

1,528 Views
Message 37 of 55

Re: IPv6 on TP-Link Archer AX95 with BT Full Fibre

Go to solution

I’m gonna look at returning this AX95 and maybe getting an ASUS, I like this one because it has 8 antennas and 2 5GHz bands, any suggestions?

0 Ratings
Reply
licquorice
Distinguished Sage
Distinguished Sage

on ‎08-08-2023 7h55

1,505 Views
Message 38 of 55

Re: IPv6 on TP-Link Archer AX95 with BT Full Fibre

Go to solution

The RT AC88U seems a popular choice.

0 Ratings
Reply
NJackooo
Aspiring Contributor

on ‎08-08-2023 8h44

1,496 Views
Message 39 of 55

Re: IPv6 on TP-Link Archer AX95 with BT Full Fibre

Go to solution

So TP-Link support tells me the AX95 is comptible the a /56 prefix.

Still doesn't explain why it won't work on BT for me and other Archer customers...

Absolute nightmare

0 Ratings
Reply
licquorice
Distinguished Sage
Distinguished Sage

on ‎08-08-2023 8h48

1,493 Views
Message 40 of 55

Re: IPv6 on TP-Link Archer AX95 with BT Full Fibre

Go to solution

They told me my 9980 was compatible a few years ago, I could never get that to work either!!

0 Ratings
Reply