cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
475 Views
Message 11 of 13

Re: Port Forwarding Rules not binding

This what I would expect to see with no ports forwarded.

grcscan.jpg

And this with a web server listening on port 80

grcscan2.jpg

0 Ratings
Reply
467 Views
Message 12 of 13

Re: Port Forwarding Rules not binding

@RetroChaos 

I realised exactly what you were saying about the Swann being replaced by the Dahua but was just going through the way the Swann setup works thinking that a similar approach was necessary with the Dahua.

0 Ratings
Reply
435 Views
Message 13 of 13

Re: Port Forwarding Rules not binding

Possibly silly questions, but I agree about the "stealth" response showing the router is at least doing something..

Did you set the default gateway (and correctly) when you were configuring the static IP? It could be the DVR is unable to respond because it doesnt know where to route particularly if the address had changed. Those lack of responses would look like dropped packets.

2 - is the DVR in the correct subnet? Not sure it would let you save if it wasn't, but similar symptoms

Sorry if completely unhelpful

0 Ratings
Reply