Purple flashing light

[behzad]

I use the BT smart home as an access point, is there a way to disable this flashing purple light? Because now its always blinking.

[gg30340]

---

@behzad wrote:

I use the BT smart home as an access point, is there a way to disable this flashing purple light? Because now its always blinking.

---

Put a piece of black insulation tape over it.

[behzad]

Really there isn't a way or option to disable it?

[licquorice]

No

[naylor2006]

@gg30340 said:

Put a piece of black insulation tape over it.

Im having deja vu….

Do you reckon you could achieve a solid orange or red light by taking a patch cable and hooking up the assigned WAN port to one of the LAN ports? 

Could be more desirable.

[behzad]

I think it is possible to find a creative way to keep the light solid in such a situation. Can you explain more about your idea? There is no WAN port in BT Hub6.

[licquorice]

The idea (which might not work anyway), is only applicable to the Smart Hub2 where LAN port 4 can be configured as a WAN port for FTTP.

[behzad]

Is there any guidance for this?

[licquorice]

Any guidance for what?

[behzad]

For configure LAN port 4 as a WAN port