cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
1,710 Views
Message 1 of 9

Broadband Dropping

Hello,

My broadband continually drops on a daily basis, i have done the usual line test, broadband test, checked all the cables, turned off and restarted but still the same issues. any advice would be appreciated

Drew1980_0-1607896564689.pngDrew1980_1-1607896581029.png

Drew1980_2-1607896668848.png

 

 

0 Ratings
8 REPLIES 8
1,698 Views
Message 2 of 9

Re: Broadband Dropping


in order for the forum members to help please can you post the stats from your router (if hub enter 192.168.1.254 in your browser) and if  HH5 then go to troubleshooting then helpdesk and if HH6/SH2 then advanced settings then technical log information . 

Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal

Are you using the test socket with a filter to see if that improves your connection speed and stability

Someone may then be able to offer help/assistance/suggestions to your problem



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings
1,671 Views
Message 3 of 9

Re: Broadband Dropping

Hello,

tried the quiet  line test and no issues there, run troubleshooter testing of broadband and line and nothing there either

Product name:Smart Hub
 

 

Serial number:+088044+1806003000
 

 

Firmware version:v0.09.06.25010-BT
 

 

Firmware updated:Wed Jun 10 19:35:00 2020
 

 

Board version:01
 

 

DSL uptime:0 days,17 Hours08 Mins52 Secs
 

 

Data rate:14.083 Mbps / 45.866 Mbps
 

 

Maximum data rate:14.231 Mbps / 46.790 Mbps
 

 

Noise margin:6.2 / 6.3
 

 

Line attenuation:8.9 / 9.5
 

 

Signal attenuation:8.8 / 9.5
 

 

Data sent / received:1.5 GB / 6.6 GB
 

 

Broadband username:bthomehub@btbroadband.com
 

 

BT Wi-fi:Activated
 

 

2.4 GHz wireless network name:BTHub6-F356
 

 

2.4 GHz wireless channel:Automatic (Smart Wireless)
 

 

5 GHz wireless network name:BTHub6-F356
 

 

5 GHz wireless channel:Automatic (Smart Wireless)
 

 

Wireless security:WPA2
 

 

Wireless mode:Mode 1
 

 

Firewall:Disabled
 

 

MAC address:94:6A:B0:41:70:16
 

 

Software variant:-
 

 

Boot loader:0.1.6-BT (Fri Sep 9 10:05:09 2016
0 Ratings
1,667 Views
Message 4 of 9

Re: Broadband Dropping

are you using the master socket?  which master socket do you have

Keith_Beddoe_0-1577035081757.jpegMaster socket types.jpeg



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings
1,647 Views
Message 5 of 9

Re: Broadband Dropping

The one I'm using is figure 5, I have taken the plate off and tried the test line for phone, no issues

 

Thanks 

0 Ratings
1,639 Views
Message 6 of 9

Re: Broadband Dropping

if you have connected a filter to test socket and that has stopped internet dropping when making/receiving a call then you have a faulty faceplate which need replaced.  probably get one ebay/amazon



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings
1,625 Views
Message 7 of 9

Re: Broadband Dropping

Spoiler
Only tried the phone via the test socket but I have just connected the filter and tried the phone and broadband. Phone working fine but no Internet connection, would you assume still an issue with the plate
0 Ratings
1,617 Views
Message 8 of 9

Re: Broadband Dropping

test-socket-thumb.jpg

When you remove the front plate shown by red arrow you then have to remove the middle section shown by yellow arrow to the have access to the test socket shown by black arrow.

if you don't remove the middle section you are not using the test socket



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings
1,608 Views
Message 9 of 9

Re: Broadband Dropping

Okay got you know both working fine off the test socket 

0 Ratings