cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
2,244 Views
Message 1 of 7

Hybrid Connect

Go to solution

Can anyone tell me what mobile frequency the Hybrid device uses and what mobile signal strength is needed as a minimum for connection strength. apparently, it doesn't use the 800mhz as standard EE devices do.

my understanding is that both the copper and mobile signal must be comparable for it to work

 

0 Ratings
Reply
6 REPLIES 6
2,230 Views
Message 2 of 7

Re: Hybrid Connect

Go to solution

@Harpia The radio transmission info is on the back page of the Hybrid connect userguide 

I hope that helps?

Thanks

Neil

0 Ratings
Reply
2,188 Views
Message 3 of 7

Re: Hybrid Connect

Go to solution

Thanks,

 

Had a read doesn't state anywhere that you have to have minimum connection speed or what 4g rang it uses.

 

0 Ratings
Reply
2,181 Views
Message 4 of 7

Re: Hybrid Connect

Go to solution

It gives the 4G bands at the bottom of the table.

LTE Bands 1/3/7/20/38

800Mhz is band 20

0 Ratings
Reply
2,164 Views
Message 5 of 7

Re: Hybrid Connect

Go to solution

Have a look at this thread https://community.bt.com/t5/BT-Devices/Hybrid-Connect-attaching-additional-antennas/td-p/2141062

In particular message 9 shows receiver sensitivity figures.

0 Ratings
Reply
2,145 Views
Message 6 of 7

Re: Hybrid Connect

Go to solution

Thanks for the additional information very useful.

0 Ratings
Reply
2,068 Views
Message 7 of 7

Re: Hybrid Connect

Go to solution

Thanks, do you happen to know does the Hybrid Speed boost need a minimum 4g signal. I'm told BT policy is 3 bars however I cannot find this stated anywhere

 

Any help or information would be greatly appriciated

0 Ratings
Reply