issue looks like its fixed. I have just received a text from BT saying its fixed so i have tested and all looks good.
Thank you to the moderators for pushing this and helping to get this resolved.
Hi All
yes it seems to be working fine and received a message from BT saying it’s fixed. 🎉
It looks as if it's back to normal here too.
Hi All, thanks for the update and great news that your service is working ok again.
@suntran, is your service now working ok now?
Cheers
John
Yup! Just checked and working fine now.
Thanks All
@JohnC2 just for the record and interest do you know what the solution was?
Hi, @Devon_Dave there was an issue with the head-end equipment in the exchange. Openreach switched the control cards to resolve the problem.
Thanks
Neil
You posted that Openreach swapped cards in the exchange!
In the bad old days of copper lines, (including FTTC), some of the Openreach Engineers were very good but most of them were Monkey See Monkey Do. - That meant that when a neighbour complained of issues the Openreach "Enginineer", (in inverted commas), sometimes swapped your line with the neighbours problem line and doing so simply moved the problems around from one set of customers to another. - I had hoped that those poor practices of swapping stuff about to correct faults had ended.
A real engineer should fault find the system and replace the faulty card with a new card, (or, if he/she is very highly skilled repair the faulty card).
Let us hope that swapped cards means that the cards were replaced with brand new cards and not swapped with other cards in the exchange and in doing so swapping the faults around.