cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
2,800 Views
Message 1 of 25

Full Fibre 500 to Full Fibre 900

Go to solution

Just upgraded from Full Fibre 500 to Full Fibre 900.  After 2 days speed is averaging 500.  Does it take a while to come up to the guarranteed speed?  Around 700 I think.

0 Ratings
Reply
24 REPLIES 24
2,758 Views
Message 2 of 25

Re: Full Fibre 500 to Full Fibre 900

Go to solution

Have you tried power cycling the ONT, it worked for me when I went from 500 to 900 but it may have just been a coincidence.

0 Ratings
Reply
2,752 Views
Message 3 of 25

Re: Full Fibre 500 to Full Fibre 900

Go to solution

How would I do that?  What is ONT?

0 Ratings
Reply
2,746 Views
Message 4 of 25

Re: Full Fibre 500 to Full Fibre 900

Go to solution

@tmarsh12345 are you using a wired connection for these speedtests or are you using WiFi?

Note: You won't get full 900mb speeds using WiFi on the smarthub 2.

0 Ratings
Reply
2,739 Views
Message 5 of 25

Re: Full Fibre 500 to Full Fibre 900

Go to solution
Wired.
0 Ratings
Reply
2,730 Views
Message 6 of 25

Re: Full Fibre 500 to Full Fibre 900

Go to solution

The ONT is the fibre modem which you have connected to the hub probably with the red ended ethernet cable. Small white box with probably 3 green !ights



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings
Reply
2,729 Views
Message 7 of 25

Re: Full Fibre 500 to Full Fibre 900

Go to solution

Thanks.  So do I press a button?

0 Ratings
Reply
2,713 Views
Message 8 of 25

Re: Full Fibre 500 to Full Fibre 900

Go to solution

Just switch it off wait and then switch back on



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings
Reply
2,694 Views
Message 9 of 25

Re: Full Fibre 500 to Full Fibre 900

Go to solution

Did that but still just over 500.  Upload is averaging 115 which is about right I think.

0 Ratings
Reply
2,691 Views
Message 10 of 25

Re: Full Fibre 500 to Full Fibre 900

Go to solution
I have always used Thinkbroadband for speed testing and just tried a different site, getting just under 700, 670 - 690 so perhaps nothing wrong?
0 Ratings
Reply