cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
1,757 Views
Message 11 of 23

Re: Sudden Solid Orange Light

No sorry my mistake they are all green just like the picture above.

0 Ratings
Reply
1,750 Views
Message 12 of 23

Re: Sudden Solid Orange Light

F4AB17DB-6DCB-4144-8BE0-86FC80A4CCAE.jpeg

0 Ratings
Reply
1,747 Views
Message 13 of 23

Re: Sudden Solid Orange Light

Check the cable between the modem and the home hub, and make sure both ends are securely clipped in place, they should not be possible to remove without releasing the retaining clips.

As already suggested, factory reset the home hub, and then make sure its configured for FTTP mode.

0 Ratings
Reply
1,729 Views
Message 14 of 23

Re: Sudden Solid Orange Light

4BEA89D1-0CC1-4864-AFF9-8A5E4C3F9436.jpeg

0 Ratings
Reply
1,704 Views
Message 15 of 23

Re: Sudden Solid Orange Light

Spoke with BT through Twitter and the best they can do is send an engineer out on Thursday. They said they saw no fault after doing checks 😩. So looks like this won’t be sorted anytime soon

0 Ratings
Reply
1,698 Views
Message 16 of 23

Re: Sudden Solid Orange Light

It could be a faulty home hub. If you have a laptop with a LAN port, you could try making a direct PPPoE connection to the modem as described here.

Just go into Network and Sharing centre and click set up a new connection or network, select PPPoE and enter Username : bthomehub@btbroadband.com Password: BT.

If you do get Internet access, then that indicates there is an issue with the home hub.

Its also possible to share that connection with wireless devices within the house, provided the laptop also has a wireless card. 

 

 

0 Ratings
Reply
1,692 Views
Message 17 of 23

Re: Sudden Solid Orange Light

We have a laptop, iPad, Xbox but the laptop doesn’t have a lan port


 

0 Ratings
Reply
1,685 Views
Message 18 of 23

Re: Sudden Solid Orange Light

It should be possible to do it on the Xbox. A Google search should give you some help.

0 Ratings
Reply
1,668 Views
Message 19 of 23

Re: Sudden Solid Orange Light

  1. Under Configure Network, select the Additional Settings tab.
  2. Select PPPoE settings.
  3. Select User Name, enter the PPPoE user name, then select Done.
  4. Select Password, enter the PPPoE password, then select Done.
  5. Select Service Name, enter the PPPoE service name, select Done, and then select Done.

This was from a Google search.

0 Ratings
Reply
1,652 Views
Message 20 of 23

Re: Sudden Solid Orange Light

0 Ratings
Reply