cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
1,205 Views
Message 11 of 19

Re: Replaced line, lower sync speeds

Hi @Manvadher thanks for sending over your details, I've put through a DLM request and it should complete within the next 24 hours. Can you post back to let me know if you notice any improvement?

Thanks

Neil

1,166 Views
Message 12 of 19

Re: Replaced line, lower sync speeds

Hi Neil, 

IMG-20230406-WA0001.jpg

Still the same speed. I do see a number of TR69 events. Does it need a power cycle or wait longer?

Thx

0 Ratings
Reply
1,160 Views
Message 13 of 19

Re: Replaced line, lower sync speeds

1. You haven't had a DLM reset, your DSL uptime is 11 days.

2. A DLM reset will only give you a tiny increase in speed if at all looking at your line stats.

3. I wonder if, when your line was replaced, it was connected leg and leg. I.e one wire from one pair and one wire from a different pair rather than a true pair.

0 Ratings
Reply
1,126 Views
Message 14 of 19

Re: Replaced line, lower sync speeds

Thanks for the reply. 

My view is that if I obtained high speeds with a corroded wire, a replaced wire should be the same or better, not worse. Regarding your point 3, it was a new cable with a new master socket in a new location (garage vs hallway) so unlikely it's the leg to leg thing. Unless you mean the way the pairs in the little connection box are joined together...

I think there is one connection at the point the cable enters the house through the ground (where the initial corrosion occurred) and then another between the external wall going into the garage to go from ext cable to int cable, so 2 cuts in total. BT line // Ext cable to garage // Garage to master socket. 

0 Ratings
Reply
1,122 Views
Message 15 of 19

Re: Replaced line, lower sync speeds

Why is it unlikely to be leg and leg? The engineer could just as easily have used the wrong wires in a new cable as in an old one.

The other possibility is that the new cable is a different gauge to the old and thus higher impedance.

0 Ratings
Reply
1,096 Views
Message 16 of 19

Re: Replaced line, lower sync speeds

Hi, @Manvadher I'm sorry the reset doesn't appear to have been actioned yet. I'll put a request through again this afternoon.

Thanks

Neil

1,030 Views
Message 17 of 19

Re: Replaced line, lower sync speeds

Hi @NeilO,

Any ideas if the reset went through? The modem seemed to have restarted about 5 days ago but no change in sync or stats.

Thanks 

IMG-20230417-WA0002.jpg

0 Ratings
Reply
1,021 Views
Message 18 of 19

Re: Replaced line, lower sync speeds

Your connection reset 5 days ago with marginal increase in speed but with similar attainable speed. Looks like as good as it gets



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings
Reply
997 Views
Message 19 of 19

Re: Replaced line, lower sync speeds

Hi @Manvadher I emailed the team in Openreach who do the resets on Saturday as they still haven't updated me, unfortunately, it's not looking promising. I'll allow them another 24 hours to respond and will get back to you tomorrow to agree on a way forward with this.

Thanks

Neil