Hybrid Connect

[Harpia]

Can anyone tell me what mobile frequency the Hybrid device uses and what mobile signal strength is needed as a minimum for connection strength. apparently, it doesn't use the 800mhz as standard EE devices do.

my understanding is that both the copper and mobile signal must be comparable for it to work

[NeilO]

@Harpia The radio transmission info is on the back page of the Hybrid connect userguide 

I hope that helps?

Thanks

Neil

[Harpia]

Thanks,

Had a read doesn't state anywhere that you have to have minimum connection speed or what 4g rang it uses.

[licquorice · Accepted solution]

It gives the 4G bands at the bottom of the table.

LTE Bands 1/3/7/20/38

800Mhz is band 20

[licquorice]

Have a look at this thread https://community.bt.com/t5/BT-Devices/Hybrid-Connect-attaching-additional-antennas/td-p/2141062

In particular message 9 shows receiver sensitivity figures.

[Harpia]

Thanks for the additional information very useful.

[Harpia]

Thanks, do you happen to know does the Hybrid Speed boost need a minimum 4g signal. I'm told BT policy is 3 bars however I cannot find this stated anywhere

Any help or information would be greatly appriciated