cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
868 Views
Message 1 of 3

TP Link

I have a TL-WA850RE range extender which I have connected to my BT smart hub via an Ethernet cable.I have managed to set this up and have about 5 or 6 separate devices connected to it which all work fine.The only thing that doesn’t is my iPhone which is IOS 16.1.2 when I connect the phone to my TP link I get a “Weak Security” signal on the WiFi.I have checked the settings in my BT Smart Hub and they are set to WPA2 which is the recommended setting.The only other choice I have is WPA-Auto or None. Any ideas on how I prevent this “Weak Security” signal.Thanks for your assistance.
 
 
 

 

0 Ratings
Reply
2 REPLIES 2
841 Views
Message 2 of 3

Re: TP Link

The TP link device has an in-built web server for setup purposes, I suspect that you will find that encryption is set to WEP, it needs to be WPA2.

The setup manual gives two methods of connecting to the web server.

816 Views
Message 3 of 3

Re: TP Link

I suspect it is probably just the usual Apple paranoia and can be ignored