cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
1,609 Views
Message 1 of 28

Banded Broadband

Go to solution

Hi,

Hoping someone can help as my connection is being limited and seems stuck on a banded profile of 60/20.

Line is stable for over a year now.

Can someone please look into remove the cap so as to achieve full potential of the line?

Ch4d_0-1688124790043.png

Thanks  🙂

 

0 Ratings
Reply
27 REPLIES 27
1,579 Views
Message 2 of 28

Re: Banded Broadband

Go to solution
DLM usually removed banded line in their own time! Don't think BT will able to remove it off unless there is a fault on the line for the engineer to attend to repair fault then resetted DLM. If no fault, then nothing BT can do about it. You need to wait until DLM will removed banded in due course.
1,562 Views
Message 3 of 28

Re: Banded Broadband

Go to solution

your stats, probably tplink, don't show internet connection time or system up time



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
1,554 Views
Message 4 of 28

Re: Banded Broadband

Go to solution

Its a Draytek Vigor 130, running into a Vigor 2925ac.

I've seen 3500 hours system up time before, but we had a power cut over a week ago.

The connection stats haven't budged for at least two years now.

Ch4d_0-1688130379530.png

The  available lines speeds have increased in the last few months as our estate has been upgraded with FTTP and quite a lot of Openreach vans have been flying about upgrading people.

Just wanted to see if there is an easy way to make use of the spare capacity.

 

Thx

 

0 Ratings
Reply
1,538 Views
Message 5 of 28

Re: Banded Broadband

Go to solution

You seem to have a fairly high CRC error count.

I would be extremely surprised if you noticed the difference between 60M and 67M in any case.

0 Ratings
Reply
1,531 Views
Message 6 of 28

Re: Banded Broadband

Go to solution

system uptime just shows how long system has had a power connection and not same as internet connection time which is the important time



If you like a post, or want to say thanks for a helpful answer, please click on the Ratings 'Thumbs up' on left hand side.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
0 Ratings
Reply
1,487 Views
Message 7 of 28

Re: Banded Broadband

Go to solution

I assume using the terminal window, you've already used the "vdsl snr" command?  If not then using a negative command will try to force the SNR lower.  As the cabinet ALWAYS has the last say, you can try "vdsl snr -50", noting though that if you do increase the download speed the upload speed will usually decrease.

*Just don't play with that command too much or DLM may kick in as it reboots the connection everytime!


I only learn by making mistakes and owning up to them - boy do I learn a lot!
1,446 Views
Message 8 of 28

Re: Banded Broadband

Go to solution

As DLM has banded the line, nothing other than a DLM reset by Openreach will have any effect.

1,422 Views
Message 9 of 28

Re: Banded Broadband

Go to solution

Played with that setting years ago and did get higher rates.  

At the moment no snr changes are in play.

 

 

0 Ratings
Reply
1,156 Views
Message 10 of 28

Re: Banded Broadband

Go to solution

Well just spent over an hour on the phone with BT repairs, then another networking department.

My local cabinet has recently been updated with vectoring, and the attainable download speed has increased to 78mbs.

Sync is still restricted to 60mbs as before.

BT wont do anything as there is no fault on the line and its stable.

They will however get an engineer involved for  £185.00 with no guarantees.

So unless I have a faulty line they will not do a DLM reset or remove the banding.  😞

Just pondering if its a marketing move to force us onto FTTP as its available in my area?.

 ---------------------- ATU-R Info (hw: annex A, f/w: annex A/B/C) -----------
   Running Mode            :      17A       State                : SHOWTIME
   DS Actual Rate          : 59997000 bps   US Actual Rate       : 20000000 bps
   DS Attainable Rate      : 78371444 bps   US Attainable Rate   : 26633494 bps
   DS Path Mode            :        Fast    US Path Mode         :        Fast 
   DS Interleave Depth     :        1       US Interleave Depth  :        1 
   NE Current Attenuation  :       16 dB    Cur SNR Margin       :       10  dB
   DS actual PSD           :     6. 5 dB    US actual PSD        :     6. 7  dB
   NE CRC Count            :       44       FE CRC Count         :    12941
   NE ES Count             :       12       FE  ES Count         :     4725
   Xdsl Reset Times        :        0       Xdsl Link  Times     :        1
   ITU Version[0]          : fe004452       ITU Version[1]       : 41590000
   VDSL Firmware Version   : 05-07-06-0D-01-07   [with Vectoring support] 
   Power Management Mode   : DSL_G997_PMS_L0 
   Test Mode               : DISABLE 
  -------------------------------- ATU-C Info ---------------------------------
   Far Current Attenuation :       17 dB    Far SNR Margin       :       10  dB
   CO ITU Version[0]       : b5004946       CO ITU Version[1]    : 544eb206
   DSLAM CHIPSET VENDOR    : < IFTN >

 

0 Ratings
Reply